Compare Devices for Meshtastic and MeshCore
Browse and compare devices for use on popular LoRa mesh networking technologies. Data set includes microcontroller, frequency support, power consumption estimates, interfaces, and other data as applicable(like battery chemistry).
Sort By
Categories
LoRa Frequencies
Microcontroller
LoRa Radio
Price Range
Shows devices with any price overlap in this range
Min TX Power
Any TX power
Devices without a listed TX power are hidden while this is above 0.
Features
AtlaVox Beacon Solar Node
AtlaVox
Solar node based on RAK WisBlock in an IP67 aluminum enclosure with a 5W panel.
RAK19007 with RAK4631
RAKwireless
Module kit based on RAK WisBlock with 4 module slots and IPEX connectors.
SenseCAP Solar Node P1 Pro
Seeed Studio
Solar node based on XIAO with a 5W panel, RP-SMA connector and Grove connector.
WisMesh Pocket V2
RAKwireless
Handheld based on RAK WisBlock with a 1.3-inch OLED, GNSS module, and SMA connector.
WisMesh Repeater Mini V2
RAKwireless
Solar node based on RAK WisBlock in an IP67 ABS enclosure with an RP-SMA connector.
SenseCAP MeshTracker X1
Seeed Studio
Card in an IP66 enclosure with dual-band L1+L5 GNSS, a barometer and a vibration motor.
RAK19003 with RAK4631
RAKwireless
Module kit based on RAK WisBlock with 2 module slots and IPEX connectors.
GAT562 30s Mesh Solar Repeater
MTools Tec
Relay with IPEX connectors, built in filter and power amplifier.
Meshtec B1
Meshtech
Handheld based on RAK WisMesh B1 in an ABS enclosure with a 1.3-inch OLED and optional SMA connector.
SenseCAP Indicator
Seeed Studio
Desktop unit with a 3.95-inch touchscreen and CO2 and tVOC sensors, USB powered.
Spec5 Nomad 2
SpecFive
Handheld based on Raspberry Pi in a PETG case with a 5.0-inch touchscreen, tactile keyboard, and Ethernet.
Spec5 Relay
SpecFive
Relay based on RAK WisBlock in an IP67 PETG enclosure with a 12W panel and 8 dBi fiberglass antenna.
Spec5 Spectre Pro
SpecFive
Handheld in a carbon fiber reinforced PETG case with a 3.88-inch touchscreen and optional GNSS module.
Thinknode M3
Elecrow
Card in an IP66 enclosure with an internal antenna and temperature, humidity and accelerometer sensors.
Thinknode M4
Elecrow
Power bank with a built in radio, wireless charging, and temperature and humidity sensors.
Thinknode M5
Elecrow
Handheld in an ABS case with a 1.54-inch e-ink display, rotary encoder, and RP-SMA connector.
Wio SX1262 with XIAO ESP32S3
Seeed Studio
Dev board based on XIAO with IPEX connectors and an optional GNSS module.
Wio SX1262 with XIAO nRF52840
Seeed Studio
Dev board based on XIAO with an IPEX connector and an optional GNSS module.
Wio Tracker 1110
Seeed Studio
Dev board based on WM1110 with a temperature and humidity sensor, accelerometer, and Grove connectors.
Wio-WM1110 Dev Kit
Seeed Studio
Dev board based on WM1110 with a temperature and humidity sensor, accelerometer, and Grove connectors.
WisMesh 1W Booster Starter Kit
RAKwireless
Module kit based on RAK WisBlock with a power amplifier and built in filter.
WisMesh Board ONE
RAKwireless
Dev board with an optional 1.3-inch OLED, GNSS module, and a sensor slot.
WisMesh Ethernet MQTT Gateway
RAKwireless
Gateway based on RAK WisBlock with Ethernet, optional PoE, and an RP-SMA connector.
WisMesh Repeater
RAKwireless
Relay based on RAK WisBlock in an IP67 enclosure with an RP-SMA connector and optional 10W panel.
WisMesh Tap V2
RAKwireless
Handheld based on RAK WisBlock in an IP65 enclosure with a 320x240 TFT touchscreen, on-screen keyboard, and offline map storage.
WisMesh WiFi MQTT Gateway V2
RAKwireless
Gateway based on RAK WisBlock with an RP-SMA connector, optional IP65 enclosure.
WisMesh Repeater Mini
RAKwireless
Solar node based on RAK WisBlock in an IP67 enclosure with an RP-SMA connector.
H1 with External Antenna
Muzi Works
Handheld based on the Heltec V3 in a 3D printed case with a whip antenna.
NOMAD Device w/ Meshtastic®
Pacific Northwest 3D
Handheld based on the Heltec V3 with an SMA connector.
R1 with External Antenna
Muzi Works
Handheld based on RAK4631 in a 3D printed case with an SMA connector.
Spec5 Nomad
SpecFive
Handheld based on Raspberry Pi with a 5-inch touchscreen, tactile keyboard and Ethernet.
Station G2
B&Q Consulting
Desktop unit with a power amplifier and LNA, 1.3-inch OLED, USB PD powered.
WisMesh Pocket Mini
RAKwireless
Handheld based on RAK WisBlock in a 3D printed case with an internal antenna.
WisMesh Tap
RAKwireless
Handheld based on RAK WisBlock in an IP65 enclosure with a 320x240 TFT touchscreen and GNSS module.
WisMesh WiFi MQTT Gateway
RAKwireless
Gateway based on RAK WisBlock with an RP-SMA connector, optional IP65 enclosure.
Missing a device?
Know a device that should be listed here? Suggest it and we will add it.